Watch Spring Bars: Size and Selection Guide

A spring bar is a small component with an important job: retaining a watch strap or bracelet between the case lugs. Choosing a replacement starts with understanding which length the listing describes, then checking the body diameter and the end fittings.

Illustrative workshop scene of double-flanged spring bars on a charcoal mat
Illustrative workshop scene; not to scale or a fitting demonstration.

Three length measurements to keep separate

Strap width, spring-bar body length and overall length describe different things. The standard range below is labelled by strap width and lists the body and overall lengths separately. The Swiss double-flanged range is listed by its overall fully compressed length.

Range How its size is described Example from the range
Standard spring bars Strap width, plus separate body and overall lengths For a 20mm strap: 19.9mm body, 21.9mm overall, 1.8mm body diameter
Swiss double-flanged spring bars Fully compressed overall length Γ— body diameter 20 Γ— 1.5mm: 20mm fully compressed overall length, 1.5mm body diameter

Do not treat the two examples as an interchangeability recommendation. The same number in a title can refer to a different measurement.

Illustrative pair of Swiss-style spring bars in an ivory parts tray
Illustrative workshop scene; not to scale or a fitting demonstration.

Check more than strap width

Compare the replacement with the original bar and the watch fittings. Check the case-lug spacing, strap or bracelet opening, body diameter, pivot fit and access for removal. A thicker bar must still fit the strap or bracelet; matching length alone is not enough.

The Swiss range has double-flanged ends. The standard range shown here has plain projecting pins. Choose the end style that suits the watch and the available access. Pivot diameter and projection are not specified in these listings, so no universal compatibility with a watch brand or model is claimed.

Illustrative standard plain-end spring bars on folded ivory cloth
Illustrative workshop scene; not to scale or a fitting demonstration.

Fitting and keeping spare bars organised

Use an appropriate spring-bar tool, work over a clear surface and protect the case from accidental tool marks. Check that both pivots engage securely and that the strap or bracelet is retained before the watch is worn. If the original fitting or required dimensions are uncertain, have a watchmaker assess them.

Keep spare pairs dry in labelled compartments. Record the length convention, body diameter and end style together so that bars which look similar are not mixed.

Illustrative macro view of double-flanged spring-bar ends
Illustrative workshop scene; not to scale or a fitting demonstration.

Shop the spring-bar sizes

Each linked listing is supplied as a pair. Open the relevant diameter group, then choose the required length and check the complete product specifications.

Swiss double-flanged bars β€” 2mm body diameter
Swiss double-flanged bars β€” 1.8mm body diameter
Swiss double-flanged bars β€” 1.5mm body diameter
Swiss double-flanged bars β€” 1.3mm body diameter
Standard bars β€” labelled by strap width

Product photographs represent their ranges; the workshop images in this guide are illustrative. Use the written measurements, rather than apparent image proportions, when choosing a replacement.