Two round crystals can measure the same diameter across the rim yet sit quite differently on a watch. When replacing a domed acrylic glass, take two observations from the original: its outside diameter and its curve when viewed from the side.

Read the profile from the side
Lay the old crystal rim-down on a clean, level surface and look across it at bench height. A low dome rises gently from the rim. A high dome stands more prominently above it. The profile affects the silhouette of the watch and the space available above the hands. The terms describe the shape, rather than a fixed height in millimetres.

Measure across the rim
Measure the widest outside diameter with callipers, using light pressure. Take a second reading after a quarter turn. If the measurements disagree, check for a chipped or distorted rim before choosing a size. A measurement across the visible dial opening alone does not establish the required crystal diameter.

Check the fit in the case
Examine how the original glass is retained. A matching nominal diameter is only part of the selection: the rim must suit the case, and the hands must clear the inside of the dome throughout their travel. If the original is missing, establish the fitting dimensions from the case and its retaining arrangement.

Low dome size index
Outside diameter in millimetres. Select a size to view its price and availability.
10–14.9mm
10.0 · 10.2 · 10.4 · 10.6 · 10.8 · 11.0 · 11.2 · 11.4 · 11.6 · 11.8 · 12.0 · 12.2 · 12.4 · 12.6 · 12.8 · 13.0 · 13.2 · 13.4 · 13.6 · 13.8 · 14.0 · 14.2 · 14.4 · 14.6 · 14.8
15–19.9mm
15.0 · 15.2 · 15.4 · 15.6 · 15.8 · 16.0 · 16.2 · 16.4 · 16.6 · 16.8 · 17.0 · 17.2 · 17.4 · 17.6 · 17.8 · 18.0 · 18.2 · 18.4 · 18.6 · 18.8 · 19.0 · 19.2 · 19.4 · 19.6 · 19.8
20–24.9mm
20.0 · 20.2 · 20.4 · 20.6 · 20.8 · 21.0 · 21.2 · 21.4 · 21.6 · 21.8 · 22.0 · 22.2 · 22.4 · 22.6 · 22.8 · 23.0 · 23.2 · 23.4 · 23.6 · 23.8 · 24.0 · 24.2 · 24.4 · 24.6 · 24.8
25–29.9mm
25.0 · 25.2 · 25.4 · 25.6 · 25.8 · 26.0 · 26.2 · 26.4 · 26.6 · 26.8 · 27.0 · 27.2 · 27.4 · 27.6 · 27.8 · 28.0 · 28.2 · 28.4 · 28.6 · 28.8 · 29.0 · 29.2 · 29.4 · 29.6 · 29.8
30–34.9mm
30.0 · 30.2 · 30.4 · 30.6 · 30.8 · 31.0 · 31.2 · 31.4 · 31.6 · 31.8 · 32.0 · 32.2 · 32.4 · 32.6 · 32.8 · 33.0 · 33.2 · 33.4 · 33.6 · 33.8 · 34.0 · 34.2 · 34.4 · 34.6 · 34.8
35–39.9mm
35.0 · 35.2 · 35.4 · 35.6 · 35.8 · 36.0 · 36.2 · 36.4 · 36.6 · 36.8 · 37.0 · 37.2 · 37.4 · 37.6 · 37.8 · 38.0 · 38.2 · 38.4 · 38.6 · 38.8 · 39.0 · 39.2 · 39.4 · 39.6 · 39.8
40–44.9mm
40.0 · 40.2 · 40.4 · 40.6 · 40.8 · 41.0 · 41.2 · 41.4 · 41.6 · 41.8 · 42.0 · 42.2 · 42.4 · 42.6 · 42.8 · 43.0 · 43.2 · 43.4 · 43.6 · 43.8 · 44.0 · 44.2 · 44.4 · 44.6 · 44.8
45–49.9mm
45.0 · 45.2 · 45.4 · 45.6 · 45.8 · 46.0 · 46.2 · 46.4 · 46.6 · 46.8 · 47.0 · 47.2 · 47.4 · 47.6 · 47.8 · 48.0 · 48.2 · 48.4 · 48.6 · 48.8 · 49.0 · 49.2 · 49.4 · 49.6 · 49.8
50–54.9mm
50.0
High dome size index
Outside diameter in millimetres. Select a size to view its price and availability.
15–19.9mm
15.0 · 15.2 · 15.4 · 15.6 · 15.8 · 16.0 · 16.2 · 16.4 · 16.6 · 16.8 · 17.0 · 17.2 · 17.4 · 17.6 · 17.8 · 18.0 · 18.2 · 18.4 · 18.6 · 18.8 · 19.0 · 19.2 · 19.4 · 19.6 · 19.8
20–24.9mm
20.0 · 20.2 · 20.4 · 20.6 · 20.8 · 21.0 · 21.2 · 21.4 · 21.6 · 21.8 · 22.0 · 22.2 · 22.4 · 22.6 · 22.8 · 23.0 · 23.2 · 23.4 · 23.6 · 23.8 · 24.0 · 24.2 · 24.4 · 24.6 · 24.8
25–29.9mm
25.0 · 25.2 · 25.4 · 25.6 · 25.8 · 26.0 · 26.2 · 26.4 · 26.6 · 26.8 · 27.0 · 27.2 · 27.4 · 27.6 · 27.8 · 28.0 · 28.2 · 28.4 · 28.6 · 28.8 · 29.0 · 29.2 · 29.4 · 29.6 · 29.8
30–34.9mm
30.0 · 30.2 · 30.4 · 30.6 · 30.8 · 31.0 · 31.2 · 31.4 · 31.6 · 31.8 · 32.0 · 32.2 · 32.4 · 32.6 · 32.8 · 33.0 · 33.2 · 33.4 · 33.6 · 33.8 · 34.0 · 34.2 · 34.4 · 34.6 · 34.8
35–39.9mm
35.0 · 35.2 · 35.4 · 35.6 · 35.8 · 36.0 · 36.2 · 36.4 · 36.6 · 36.8 · 37.0 · 37.2 · 37.4 · 37.6 · 37.8 · 38.0 · 38.2 · 38.4 · 38.6 · 38.8 · 39.8