A successful stretch bracelet starts with a cord that fits the beads and a secure finish. Diameter, bead-hole size and reel length are separate choices: a longer reel does not mean a thicker cord. This guide compares the clear elastic cords in our range and explains what to check before you begin.

Compare the four options
| Brand | Diameter | Reel length | Product |
|---|---|---|---|
| Griffin | 1mm | 5m | Shop this cord |
| Stretch Magic | 0.7mm | 5m | Shop this cord |
| Stretch Magic | 0.5mm | 10m | Shop this cord |
| Stretch Magic | 0.8mm | 5m | Shop this cord |
The 0.5mm, 0.7mm and 0.8mm reels are Stretch Magic. The 1mm reel is Griffin Jewellery Elastic Cord, a separate product range. Compare the stated dimensions and follow the instructions for the particular cord you use.
Start with the bead holes
Test a short length through the smallest hole in your selection. Allow space for any return pass needed by the design. A finer cord may fit smaller holes, while a thicker cord requires more clearance; neither choice removes the need to check the actual beads. Inspect holes for rough or sharp edges before stringing.

Plan the fit before cutting
Arrange the beads and check the bracelet’s fit around the wrist. Larger beads take up more room on the inside of a bracelet, so the laid-flat length alone may not tell you how it will feel. Leave generous working tails for the knot and adjustment. Do not cut exactly to the finished bracelet length.
Finish for the cord you are using
Follow the manufacturer’s knotting directions and practise with a short test piece. Keep the knot accessible until you have checked it. If using adhesive, confirm compatibility with the elastic and follow the adhesive instructions, including curing time. Do not assume that a crimp intended for beading wire is suitable for elastic cord.

Check the complete bracelet
After finishing, inspect the knot and gently test the piece before wearing or supplying it. Make sure the cord has not been nicked during cutting or caught against a rough bead edge. A neat-looking knot is not, by itself, proof of a secure assembly.

Store spare cord carefully
Keep unused cord on its reel, clean and away from prolonged heat and direct sunlight. Inspect elastic jewellery regularly, particularly around the knot, and restring pieces when the cord becomes damaged or loses its useful elasticity.