Thread choice starts with the bead hole, the way the piece will be finished and the colour you want to see between beads. Griffin Nylon Power is a nylon bead thread supplied on individual 2-metre cards, each with a stainless steel needle attached. It offers an alternative to natural silk for pearl and bead stringing.

Nylon Power or natural silk?
Nylon Power is a synthetic nylon thread. Natural silk is a different material, even when the colour and size number look similar. Check the range name when ordering or matching an earlier piece. Nylon Power is also different from elastic cord: choose it for a construction with suitable knots and findings, rather than assuming it will work as a stretch bracelet.
The smooth surface and range of colours make it useful when visible thread is part of a design. For a repair, compare the new thread with the original construction and the condition of the beads before committing to the complete strand.
Choose the diameter around the bead hole
Check the smallest hole in the selection, not simply the overall bead diameter. The attached needle and thread must pass through comfortably. Allow for any return passes required by the finishing method; a thread that passes through once may not leave room for a second pass.
If knotting between beads, test a short section first. The knot should stay outside the hole and sit where intended. A nominal thread diameter cannot guarantee the finished knot size, which also depends on tension and knotting technique. Do not force a needle through a tight hole.

Size numbers and nominal diameters
Use both the Griffin number and the diameter when selecting a card. The listed Nylon Power range runs from No. 0 at 0.30mm to No. 16 at 1.05mm; the numbers are identifiers and do not increase in equal diameter steps. Availability differs by colour.
| Griffin size | Nominal diameter |
|---|---|
| No. 0 | 0.30mm |
| No. 1 | 0.35mm |
| No. 2 | 0.45mm |
| No. 3 | 0.50mm |
| No. 4 | 0.60mm |
| No. 5 | 0.65mm |
| No. 6 | 0.70mm |
| No. 7 | 0.75mm |
| No. 8 | 0.80mm |
| No. 10 | 0.90mm |
| No. 12 | 0.98mm |
| No. 14 | 1.02mm |
| No. 16 | 1.05mm |

Let colour support the design
A close colour match can make knots less conspicuous, while a contrasting thread can become a deliberate part of the pattern. Lay a short length beside the beads in daylight and under the lighting in which the piece is likely to be worn. Transparent and translucent beads can change the apparent colour of the thread inside them.
Names such as garnet red, cornelian, jade green and amethyst purple describe thread colours. They do not mean that gemstone material is included. Screen settings and lighting can also affect colour appearance.
Plan the length before cutting
Each card contains 2 metres of thread. Knots, the finishing method and working tails all use length, so a finished necklace measurement is not the same as the thread length needed. Plan the whole construction, including the clasp, before cutting. Keep the attached needle available for the stringing stages that need it.

Keep the work clean and the thread protected
Inspect bead holes for rough edges and check the thread for damage as you work. Store unused thread on its card, clean and dry, away from direct heat and sharp tools. Keep the needle point protected. For a completed piece, choose care instructions that suit the beads, findings and thread together.
Browse colours and sizes
The links below lead to individual 2-metre cards. Choose the colour first, then the size and diameter. Cards are sold separately; current availability is shown on each product page.
Amethyst Purple
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Beige
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 3 (0.50mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Black
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm)
Blue
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Brown
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Coral Red
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Cornelian
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Dark Blue
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Dark Pink
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Garnet Red
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Green
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Grey
No. 0 (0.30mm) · No. 3 (0.50mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Jade Green
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Light Pink
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Lilac Purple
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Olive Green
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Red
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Turquoise Blue
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)
Yellow
No. 0 (0.30mm) · No. 1 (0.35mm) · No. 2 (0.45mm) · No. 3 (0.50mm) · No. 4 (0.60mm) · No. 5 (0.65mm) · No. 6 (0.70mm) · No. 7 (0.75mm) · No. 8 (0.80mm) · No. 10 (0.90mm) · No. 12 (0.98mm) · No. 14 (1.02mm) · No. 16 (1.05mm)