Jewellers Shanked Drill Bits: Choosing from 19 Sizes

A drill has two dimensions worth separating before you order: the cutting diameter determines the intended hole size, while the shank must fit the tool holder. Our steel shanked drill range offers 19 cutting diameters from 0.5mm to 2.3mm, each on a 2.35mm shank and supplied as one individual bit.

One shank size, nineteen cutting diameters

A 0.5mm drill and a 2.3mm drill in this range both have a 2.35mm shank. The shared shank does not make the cutting ends interchangeable. Choose the diameter for the work and confirm that the holder and equipment are suitable for the bit.

Illustrative jewellery bench with steel drills and silver and brass sheet
AI-created editorial illustration; tools, jewellery and accessories shown are not included.

Choose for the finished hole

Start with the dimensions needed by the design or fitting. A drill diameter describes the tool, rather than guaranteeing the final fit of a jump ring, pin or other component. Material, alignment and subsequent finishing can affect the result. Check the actual work and test the intended pairing.

The source specifications describe steel drills for silver and gold, also suitable for brass and copper. They do not specify a steel grade, coating or maximum speed. Follow the guidance for the equipment and work material rather than assuming one setting suits every diameter.

Illustrative silver pendant blank with a drilled hole on a wooden bench pin
AI-created editorial illustration; tools, jewellery and accessories shown are not included.

Compare the full range

All options below have a 2.35mm shank and are supplied individually. Prices shown were checked on 18 November 2026; product pages carry current availability and pricing.

Cutting diameter Shank Quantity Price
0.5mm steel drill bit 2.35mm 1 bit £7.59
0.6mm steel drill bit 2.35mm 1 bit £7.59
0.7mm steel drill bit 2.35mm 1 bit £7.59
0.8mm steel drill bit 2.35mm 1 bit £7.59
0.9mm steel drill bit 2.35mm 1 bit £7.59
1.0mm steel drill bit 2.35mm 1 bit £7.59
1.1mm steel drill bit 2.35mm 1 bit £7.59
1.2mm steel drill bit 2.35mm 1 bit £7.59
1.3mm steel drill bit 2.35mm 1 bit £7.59
1.4mm steel drill bit 2.35mm 1 bit £7.59
1.5mm steel drill bit 2.35mm 1 bit £7.59
1.6mm steel drill bit 2.35mm 1 bit £7.59
1.7mm steel drill bit 2.35mm 1 bit £7.59
1.8mm steel drill bit 2.35mm 1 bit £7.59
1.9mm steel drill bit 2.35mm 1 bit £7.59
2.0mm steel drill bit 2.35mm 1 bit £7.59
2.1mm steel drill bit 2.35mm 1 bit £7.59
2.2mm steel drill bit 2.35mm 1 bit £7.59
2.3mm steel drill bit 2.35mm 1 bit £7.59

Keep sizes easy to identify

Keep each drill with its size label and protect the fine cutting end from knocks. Return bits to separate storage after use. The single-product photograph is representative of the range and has been retouched to remove the old text overlay; it is not a scale comparison between sizes.

Illustrative storage tray with small steel drills and a micrometer
AI-created editorial illustration; tools, jewellery and accessories shown are not included.