Steel Cup Burrs: A Guide to Ten Head Sizes

The cup profile and the head size are separate choices. Our steel cup-burr selection brings together ten individual head diameters from 0.8mm to 2.9mm, each with a 2.35mm shank.

Read the measurements separately

The listed head diameter describes the head; it is not a measurement of the internal cup opening or a guaranteed matching wire diameter. The 2.35mm shank is the part held by the chuck or collet. Check both the intended work and equipment compatibility when selecting a burr.

Illustrative jewellery bench with wire, pliers and small tools
AI-created editorial illustration, not a product photograph or size comparison. Wire, jewellery and other tools are not included.

Compare the ten sizes

Each listing supplies one steel cup burr. Prices were checked on 18 November 2026; product pages show current prices and availability.

Head diameter Shank diameter Quantity Price
0.8mm cup burr 2.35mm 1 burr £4.30
1.0mm cup burr 2.35mm 1 burr £4.49
1.2mm cup burr 2.35mm 1 burr £4.25
1.4mm cup burr 2.35mm 1 burr £4.70
1.6mm cup burr 2.35mm 1 burr £4.70
1.8mm cup burr 2.35mm 1 burr £4.70
2.1mm cup burr 2.35mm 1 burr £4.70
2.3mm cup burr 2.35mm 1 burr £4.70
2.5mm cup burr 2.35mm 1 burr £8.39
2.9mm cup burr 2.35mm 1 burr £8.34
Illustrative silver wire lengths on a workshop pad
AI-created editorial illustration, not a product photograph or size comparison. Wire, jewellery and other tools are not included.

Check the tool before starting

Inspect the cup profile, cutting surface and shank. Confirm equipment, material and operating-speed suitability before use. This range is specified as steel; no steel grade, coating or maximum speed is stated. Follow the instructions for the particular equipment and tool.

Keep sizes organised

Protect cutting surfaces from knocks and keep different sizes identifiable. The product photograph is representative of the range and has been retouched to remove the old text overlay. It is not a scale comparison.

Illustrative caliper, loupe and silver ear wires on a jewellery bench
AI-created editorial illustration, not a product photograph or size comparison. Wire, jewellery and other tools are not included.

A different profile for different work

Looking for a spherical cutting head? Our steel round-burr guide now compares 36 sizes from 0.3mm to 8.0mm. A round burr and a cup burr are different profiles; choose for the work rather than matching the diameter alone.