A small change in cutter profile changes the contact with the work. Our steel setting-tool range brings together 13 stone-setting burr sizes and 14 bearing-cutter sizes, all supplied individually with 2.35mm shanks.
Start with the profile
The stone-setting burr has a pointed setting profile; the bearing cutter has a double-cone profile. Choose for the setting you are preparing, the stone and the access available. Neither a shared shank diameter nor an identical head diameter makes the two profiles interchangeable.


Two measurements to keep separate
The head diameter describes the cutting end. The shank diameter describes the part held by the tool holder. Check both when choosing a tool. Head size alone does not specify a finished setting or guarantee a fit for a stone: assess the actual stone, the metalwork and the intended seat.
Stone-Setting Burrs: sizes and individual prices
| Head diameter | Shank | Pack | Price |
|---|---|---|---|
| 1.0mm | 2.35mm | 1 tool | £2.49 |
| 1.5mm | 2.35mm | 1 tool | £2.49 |
| 1.7mm | 2.35mm | 1 tool | £2.49 |
| 2.2mm | 2.35mm | 1 tool | £4.98 |
| 2.5mm | 2.35mm | 1 tool | £6.39 |
| 2.75mm | 2.35mm | 1 tool | £6.49 |
| 3.5mm | 2.35mm | 1 tool | £7.59 |
| 4.0mm | 2.35mm | 1 tool | £9.95 |
| 4.5mm | 2.35mm | 1 tool | £19.95 |
| 5.0mm | 2.35mm | 1 tool | £9.85 |
| 5.5mm | 2.35mm | 1 tool | £9.85 |
| 7.0mm | 2.35mm | 1 tool | £9.95 |
| 8.0mm | 2.35mm | 1 tool | £9.95 |
Bearing Cutters: sizes and individual prices
| Head diameter | Shank | Pack | Price |
|---|---|---|---|
| 0.7mm | 2.35mm | 1 tool | £5.87 |
| 0.9mm | 2.35mm | 1 tool | £5.87 |
| 1.0mm | 2.35mm | 1 tool | £5.87 |
| 1.2mm | 2.35mm | 1 tool | £5.18 |
| 1.4mm | 2.35mm | 1 tool | £5.87 |
| 1.6mm | 2.35mm | 1 tool | £5.87 |
| 1.8mm | 2.35mm | 1 tool | £5.87 |
| 2.0mm | 2.35mm | 1 tool | £5.87 |
| 2.5mm | 2.35mm | 1 tool | £7.82 |
| 3.1mm | 2.35mm | 1 tool | £9.72 |
| 3.3mm | 2.35mm | 1 tool | £9.77 |
| 3.5mm | 2.35mm | 1 tool | £9.77 |
| 4.0mm | 2.35mm | 1 tool | £11.79 |
| 5.0mm | 2.35mm | 1 tool | £11.99 |

Before work begins
Confirm that the holder accepts the shank and check the equipment and tool guidance for suitable materials and speed. Inspect the head and shank, support the work securely and check progress frequently. These listings do not specify a steel grade or maximum operating speed; do not assume a rating from another tool of a similar shape.
Keep the cutting edges protected
Organise tools by profile and size so the correct one is easy to find. Keep the cutting heads separate in storage and inspect them before returning to the bench.

Explore other profiles
Compare 36 steel round-burr sizes or explore the ten cup-burr sizes. Choose each tool for its own shape and purpose.